NEC Storage Manager Reference page 11

Chapter 1 Overview
Specifying a volume (MV, RV)
Specify the name of the target volume that has an attribute specified as a volume type.
The maximum number of characters is as follows:
Rules
Start description from the first column of the line.
A line break shall be a partition of records.
Up to 1,024 single-byte characters can be described per record.
One pair can be described per record.
When there are one MV and one RV, description of the RV can be omitted.
Normally, when there are one MV and multiple RVs, description of the RVs cannot be omitted. It
can be omitted only when the iSMrc_query command or the iSMrc_wait command is used.
Use a blank space or a tab character to separate the description of the MV from the description of the
RV.
Text displayed from the sharp (#) character to the end of the record is recognized as a comment.
If there is an error in the file syntax, operations to all pairs described in the file become invalid.
When using the iSMrc_sense command, specify the volume type and the volume name for
MV_Type and MV, respectively. Descriptions of RV_Type and RV are ignored.
When describing a pair that combines a volume group or a disk group with a special file name (or
logical disk name), multiple volumes can be specified by describing multiple special file names (or
logical disk names) separated by a comma (,).
When specifying a pair that combines a volume group or a disk group with a special file name (or
logical disk name), the number of logical volumes that consist of the volume group or the disk group
must coincide with the number of special file names to be described.
If a character string, such as a NTFS folder name, includes a blank space ( ) or colon (:), enclose the
entire character string in double quotation marks (").
Table 1-4 Specifying a Volume
Target volume
Logical disk name
Special file name
Volume group name
Drive letter
Disk group name
Mount point volume name
NTFS folder name
Maximum number of
characters
32 single-byte characters
52 single-byte characters
260 single-byte characters
6