NEC Storage Manager Reference page 32

MV:/dev/rdsk/c0t1d1
RV:/dev/rdsk/c0t2d1
#
The end messages are displayed in the order Replicate commands terminate.
(2) The command is executed by specifying a volume group that consists of two logical
volumes, /dev/rdsk/c1t1d0 and /dev/rdsk/c1t1d1, for an MV
(Individual specification)
# iSMrc_replicate -mv /dev/vg100 -mvflg vg -rv /dev/rdsk/c2t0d1
/dev/rdsk/c2t0d2 -rvflg sfn -wait 2
Replicate Start
MV:/dev/rdsk/c1t1d0
RV:/dev/rdsk/c2t0d1
Replicate Start
MV:/dev/rdsk/c1t1d1
RV:/dev/rdsk/c2t0d2
Replicating.....
Replicate Normal End
MV:/dev/rdsk/c1t1d0
RV:/dev/rdsk/c2t0d1
Replicate Normal End
MV:/dev/rdsk/c1t1d1
RV:/dev/rdsk/c2t0d2
#
[ NOTES ]
The target MV is recognized by Replication Control as the Replication target disk.
The target MV and RV are paired.
The activity state of the target pair is Separate.
The Semi-Sync copy mode cannot be specified for pairs set in the same disk array. The
Semi-Sync copy mode can be specified only for pairs set in different disk arrays.
The disk array where the specified MV and RV are stored is not in the freeze state.
The pair of the specified MV and the paired RV pair are not in the Restore state.
The activity state of the pair of the specified MV and the paired upper MV is Separate.
The activity state of the pair of the specified RV and the paired lower RV is Separate.
RV is unmounted from the host.
Chapter 2 Command Reference
disk101
disk102
2000/10/10 09:11:23
disk001
disk221
2000/10/10 09:11:23
disk002
disk222
2000/10/10 09:16:12
disk001
disk221
2000/10/10 09:16:35
disk002
disk222
27
NX
NX
NX
NX
NX
NX
NX
NX
NX
NX