NEC Storage Manager Reference page 117

Chapter 2 Command Reference
-rvflg rv_flg
-file file_name
-cprange copy_range
-cpmode copy_mode
-mode operation_mode
Specify the volume type specified in -rv.
This argument must be specified together with -rv.
For information about the volume and volume types,
refer to 1.2 "Volume Types".
To specify multiple pairs, describe pairs of MVs and
RVs in file_name.
For information about the file_name description
format, refer to 1.3 "Replication Operation File".
When multiple pairs are specified, if an error occurs in
any of the pairs, the process is canceled.
Specify the range of Restore from the RV to the MV.
One of the following can be specified in
copy_range.
diff Restores only updates to the RV since
Separate from the MV to the RV.
full Restores all area of the RV to the MV
regardless of updates to the RV since
Separate.
If this argument is omitted, the operation is the same
as the operation when diff is specified.
Specify the Copy Control State for reflecting updates
to the MV to the RV.
One of the following can be specified in copy_mode.
sync Synchronous mode
semi Semi-synchronous mode
bg Background copy mode
If this argument is omitted, the operation is the same
as the operation when sync is specified.
Specify the RV operation mode during Restore
execution.
One of the following can be specified in
operation_mode.
update Restores the updates to the MV while
reflecting the update to the RV. After
Restore has been completed, the mode
switches to the Sync State(rst/sync).
protect Restores the update to the MV without
112