NEC Storage Manager Reference page 111

Chapter 2 Command Reference
-rvacc rv_access
-wait [second] | -nowait
-nocheck
-uid userid
Specify the access restriction for RV.
One of the following can be specified in rv_access.
ro Only reference can be performed for
RV.
rw Reference and update can be
performed for RV.
If this argument is omitted, the operation is the same
as the operation when rw is specified.
Specify whether to wait until difference reflection
from the MV to the RV is completed. The command
also monitors the process state in a certain time
interval. The monitoring time interval is five seconds.
When a value is specified in second, the monitoring
time interval of the disk array becomes the specified
value. The available values are 1 to 30 seconds
(integer). This value can be changed in the
replication operation option setting file. For details
of the setting, refer to 3.1 "Replication Operation
Option Setting File".
When -nowait is specified, the system does not wait
until difference reflection from the MV to the RV is
completed.
If this option is omitted, the operation is the same as
the operation when -nowait is specified.
Performs Snapshot Backup without checking the state
of the pair. Normally, the Snapshot Backup
command cannot be operated unless synchronization
of the MV and the RV has been completed. However,
specifying -nocheck allows Snapshot Backup to be
performed even when synchronization of the MV and
the RV has not been completed.
Use this specification when the synchronization time
for the MV and the RV is unknown and you want the
backup to be performed immediately.
Specify a user ID for connecting to the Microsoft SQL
Server 2000.
If this argument is omitted, the system uses a user
name and a password used for the Windows login
account.
106