NEC Storage Manager Reference page 100

Description of messages:
Receiving......
disk_array_name
management
ldn
type
ld_name
attribute
capacity
(2) The list of disk arrays is displayed.
On the Windows system
C:\> iSMrc_ldlist –d
Receiving...
---------------------------------------------------------------------------------------------------------
Disk Array Name
---------------------------------------------------------------------------------------------------------
disk_array_name
C:\>
Chapter 2 Command Reference
Data is being received.
During the joint operation with the replication
management, this message is displayed until the data
reception is completed. The display of this message
can be suppressed by setting an option. For details of
the option setting, refer to 3.1 "Replication Operation
Option Setting File" for the Windows system and
Section 3.2 "Environment Variables" for the UNIX
system.
Disk array name
Indicates whether or not the system directly recognizes
disk arrays.
direct The system recognizes the target disk
array.
indirect The system does not recognize the
target disk array.
Logical disk number
OS type
Logical disk name
Logical disk attribute
IV Unpaired logical disk
MV MV logical disk
RV RV logical disk
RV/MV Logical disks specified as both MV
and RV
Displays the logical disk capacity to one decimal
place. To display the capacity, the unit
(Bytes/KB/MB/GB/TB/PB/EB) is added.
Management
management
95