NEC Storage Manager Reference page 109

Chapter 2 Command Reference
-dbfile dbfile_name
-metafile metafile_name
-metafolder metafolder_name
-mv volume
-mvflg mv_flg
To simultaneously perform Snapshot Backup on
multiple databases, describe the database names and
the option specification for each database in
dbfile_name.
When multiple databases are specified, Snapshot
Backup is simultaneously performed on all of the
databases.
For information about the dbfile_name description
format, refer to 1.4 "Database Operation File".
When multiple databases are specified, if an error
occurs in any of the databases, the process is canceled.
Specify the name of the file that stores the metafile in
the full path.
The metafile can be created in any shared disk, MV, or
local disk.
However, it cannot be created in the volume in which
data files and log files for the Snapshot Backup target
database are located.
To simultaneously perform Snapshot Backup on
multiple databases, specify the name of the folder that
stores the metafile in the full path.
Immediately under the specified folder, a metafile is
created for each database with the name "database
name_metafile.dat".
The metafile can be created in any shared disk, MV, or
local disk.
However, it cannot be created in the volume in which
data files and log files for the Snapshot Backup target
database are located.
Specify the volume of MV.
For information about the volume and volume types,
refer to 1.2 "Volume Types".
When there is only one pair of MV and RV, this
option can be omitted.
Specify the volume type specified in -mv.
This argument must be specified together with -mv.
For information about the volume and volume types,
104