NEC Storage Manager Reference page 18

OPTIONS
The iSMvollist command recognizes the following options and arguments.
-cr
-a
-al ld_number
-ae ld_name
-ad [drive | path]
-ap disk_number
-ah HBT [LUN]
-av volume_name
-d
-dl disk_array [ld_number] Displays the relations for the disk arrays specified by
Chapter 2 Command Reference
Scans the devices connected to the host, and creates or
updates the volume information of the target devices.
When disk arrays are added or deleted, and when logical
disks are bound or unbound, you must perform this
command to re-create the Volume List.
Displays the relations for all the disk arrays in the
Volume List.
Displays the relations only for the logical disks specified
by ld_number.
Displays the relations only for the logical disks specified
by ld_name.
Displays the relations only for the drive names specified
by drive or path.
Displays the relations only for the physical disk names
specified by disk_number.
Displays the relations only for the host numbers, bus
numbers, and target IDs specified by HBT. If LUN is
specified, it displays the relations only for the specified
HBT and LUN.
Displays the relations only for the mount point volume
name specified in volume_name.
Displays the list of the disk arrays in the Volume List as
well as the number of logical drives in each disk array.
disk_array, sorted by the logical disk number as the
key.
If ld_number is specified, it displays the relations only
for the specified logical disk.
13