NEC Storage Manager Reference page 110

-rv volume
-rvflg rv_flg
-file file_name
-rvuse rv_use
Chapter 2 Command Reference
refer to 1.2 "Volume Types".
Specify the volume of RV.
For information about the volume and volume types,
refer to 1.2 "Volume Types".
When there is only one pair of MV and RV, this
option can be omitted.
Specify the volume type specified in -rv.
This argument must be specified together with -rv.
For information about the volume and volume types,
refer to 1.2 "Volume Types".
To specify multiple pairs, describe pairs of MVs and
RVs in file_name.
For information about the file_name description
format, refer to 1.3 "Replication Operation File".
When multiple pairs are specified, if an error occurs in
any of the pairs, the process is canceled.
Determine when to make the RV available. This
option is effective only when the activity state of the
target pair is Replicate.
One of the following can be specified in rv_use.
immediate Makes the immediate use of the RV
possible while reflecting the
difference between the MV and the
RV after Separate has been executed.
complete Allows the RV to be used after
Separate has been executed and the
difference between the MV and the
RV has been reflected.
default Uses the setting stored in the
replication operation option setting
file. For details of the setting, refer
to 3.1 "Replication Operation Option
Setting File".
If this option is omitted, the operation is the same as
the operation when default is specified.
105