NEC Storage Manager Reference page 78

is displayed. The <State> shows "Replicate", "Restore", "Separate",
"Fault" (for fault), or "Forced Separate" (for Forced Separate). When "Fault" or
"Forced Separate" is displayed, the End Time does not appear.
Separate Diff
Indicates the amount of copy difference in the Separate state in kilobyte.
Copy Diff
Indicates the amount of copy difference in the Replicate or Restore state in kilobyte.
RV Access
Indicates the access restrictions for RV.
Read/Write Permit (Read/Write are allowed)
rw
ReadOnly (Only Read is allowed)
ro
NotReady (Access is not available)
nr
Previous Active
Operation state before the state transition
If the pair of volumes enters the Separated State after Sync State when Restore with RV
protection is executed, the following is displayed as the pair's operation state before the state
transition:
rst/sync (protect) Completion of Restore with RV protection specified
On the UNIX system
The state of the paired volumes is displayed.
#iSMrc_query -mv mv_special_file_name -mvflg sfn -rv
rv_special_file_name -rvflg sfn
MV: Special File
LD Name
Type
RV: Special File
LD Name
Type
Activity State
Sync State
Copy Control State
<state> Start Time
<state> End Time
Separate Diff
Copy Diff
RV Access
Previous Active
#
Chapter 2 Command Reference
mv_special_file_name
mv_ld_name
mv_type
rv_special_file_name
rv_ld_name
rv_type
aaaaaaaa
bbbbbbbb
cccccccc
YYYY/MM/DD hh:mm:ss
YYYY/MM/DD hh:mm:ss
ddddddddKB
eeeeeeeeKB
ff
gggggggg
73