NEC Storage Manager Reference page 85

Chapter 2 Command Reference
[ USAGE ]
On the Windows system
The command displays volume name information.
C:\>iSMrc_sense -vol rpl302_7 -volflg ld
Disk No.
LD Name
VAA
Type
Volume Name
Path
C:\>
On the UNIX system
Volume name information is displayed.
# iSMrc_sense -vol /dev/rdsk/c5t2d0 -volflg sfn
Special file
/dev/rdsk/c5t2d0
#
[ NOTES ]
The following notes apply to the case when joint operation with the replication management is not
performed (the I/O issuance to disk arrays is directly controlled via FC).
The target volume is registered in the Volume List.
Specifying volume of a dynamic disk is not allowed.
A Volume List is not being created.
To specify a volume group, the target volume group must be active.
To specify a disk group, the target disk group must be active.
The iSM special file is not being created (the UNIX system HP-UX version only).
[ RETURN VALUE ]
0: Operation for all the paired volumes terminated normally.
1: Operation for all the paired volumes terminated abnormally.
2: Operation for some paired volumes terminated abnormally.
[ ERRORS ]
This command terminates abnormally in the following cases.
A parameter is invalid.
The instruction fails due to a disk array error.
21
rpl302_7
30000000000000020302
NX
\\?\Volume{69facee0-58a7-11d5-ad3e-806d6172696f}\
R:
LD NAME
disk001
80
VAA
30000000000000020010
Type
NX