Hardware Bag 2 Contents - Horizon Fitness CT5.1 Owner's Manual

ASSEMBLY STEP 2

HArDWArE BAG 2 CONTENTS :

BOLT (A)
20 mm
Qty: 4
RUNNING DECK
BASE FRAME
SPRING WASHER (B) FLAT WASHER (C)
15 mm 15 mm
Qty: 4 Qty: 4
LEAD WIRE
CONSOLE CABLE
RIGHT CONSOLE MAST
BOLTS (A)
SPRING WASHERS (B)
FLAT WASHERS (C)
Open hardware bag 2.
A
Pull lead wire through right console
B
mast. After pulling the lead wire through the
mast, the top of the console cable should
be located at the top of the mast. Detach and
discard the lead wire.
With the running deck in the raised
C
position, attach the right console
mast to the base frame using 4 bolts
(a), 4 spring washers (b) and 4 flat
washers (c).
NOTE: Do not completely tighten any
step 4
screws or bolts until
NOTE: Be careful not to pinch any wires
while assembling the right console mast.
is complete!
7