Features; Using The Air Conditioner - Kenmore 78073 Owner's Manual

FEATURES
1 15 4 6 8 5 7 3 14
10 9 12 13 11
USING THE AIR CONDITIONER
_To reduce the risk of fire, electric
shock, or injury to persons, read the important
SAFETY instructions section before operating this
appliance.
To begin operating the air conditioner after
installation, follow these steps:
1. Plug in the air conditioner. (To prevent electrical
hazards, do not use an extension cord or an
adapter plug.)
2. Set the exhaust vent to the CLOSE position.
3. Set the TEMP Control to the coolest setting.
4. Set the MODE control at the highest COOL level.
5. Adjust the louver for comfortable air flow.
6. Once the room has cooled, adjust the TEMP
Control to the setting you find most comfortable.
NOTE : If the air conditioner is turned off, wait 3
minutes before restarting. This allows pressure
inside the compressor to equalize. Failure to wait 3
minutes before restarting may cause inefficient
operation.
Review the AIR CONDITIONER FEATURES
section for other settings.(See page 11)
1. Cabinet
2. Vertical Air Deflector
(Horizontal Louver)
3. Cool Air Discharge
4. Front Grille
5. Inlet Grille
6. Air Filter
7. Knob
8. Air Intake
9. Power Cord
10. Evaporator
11. Condenser
12. Compressor
13. Base pan
14. Upper Guide
15. Curtain
10