Kenmore 78073 Owner's Manual page 7

I_1 Select the position that will place the sill
suppods near the outer most point on sill (FIG. 11).
Attach the sill supports to the cabinet track hole in
relation to the selected position using TYPE A
screw (_.
Lowerguide
INDOOR FIG. 11
im Place the sill supports with the cabinet on the
window sill's selected position.
111 The cabinet should be installed with a very
slight tilt (about 1/2") downward toward the outside
(FIG. 12).
Adjust the bolts and the nuts of sill supports to level
the cabinet,
i1_':1Attach the cabinet to the window stool by
driving the TYPE B screws (_) through the front
angle into window stool.
Track
Front Angle
Screw(Type B)(_
FIG. 13
Sil[ Support(_)
i_ Pull the window sash down behind the upper
guide. Pull each side curtain fully to each sash
track.
IL_lJAttach each side curtain to the window sash
using TYPE C screws _). (FIG. 14)
Screw
FIG. 14
B Attach the window locking bracket _) with
TYPE C screw (_. (FIG. 15)
FIG. 15
ir_ Slide the chassis into the cabinet. (FIG. 16)
CAUTION: For security purpose, reinstall screws at
cabinet's sides.
Cord
Screw
Screw FIG. 16
i_Cut the foam seal (_ to the proper length and
insert between the upper window sash and the
lower window sash. (FIG. 17)
FIG. 17
-7-