Table of Contents
Advertisement
Using Air Conditioner
NOTE: If the air conditioner is turned off
or the temperature is changed to a lower
setting then back to a higher setting the
compressor will shut off. Wait 3 minutes
before the compressor will restart, this
allows for the pressure inside the
compressor to equalize. . Failure to wait 3
minutes may cause inefficient operation.
When adjusting the temperature the fan
will continue to run.
Air Conditioner Features
ON/OFF
SETS
MODE
REMOTE CONTROL
the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
To begin operating the air conditioner, follow these steps:
1. Plug in the air conditioner. (To prevent electrical hazards, do not use an extension
cord or an adapter plug.)
2. Set the exhaust vent to the CLOSED position.
3. Press "On/Off" button to turn unit on.
4. Press Fan Speed "HI"
5. Press Mode "COOL"
6. Press "TEMP/TIME" down
7. Adjust the louvers for comfortable air flow.
8. Once the room has cooled, adjust the "TEMP/TIME" and Fan Speed to desired
temperature.
Review the "Air Conditioner Features" section for other settings.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel and remote
as shown below and all its functions, then follow the symbol for the functions you
LED
desire. The unit can be controlled by the touch pad alone or with the remote.
LOWERS
TEMPERATURE
OR TIME
RAISES
TEMPERATURE
OR TIMES
FAN
SPEEDS
SETS HOURS
To reduce the risk of fire, electric shock, or injury to persons, read
to the lowest setting "60 degrees"
V
Slip battery cover off and pull the piece of plastic from between
the battery end and the connector.
PLASTIC
PIECE
5
DISPLAYS
TEMPERATURE/TIME
TURNS UNIT
ON OR OFF
SETS FAN SPEEDS
SETS MODE
Advertisement
Table of Contents
