External Weight Calibration - Excell Weighing Scale User Manual

EXCELL PRECISION CO., LTD

2. External Weight Calibration

Press the TARE key
Put the platter on and make sure
there is no weight on the platter.
Then press the TARE
The scale becomes stable
Place enough weight to the platter
according to the display.
When the scale becomes stable, the
buzzer beeps for 3 times.
Remove all the weights, and the
calibration procedure is completed.
4
4
It is recommended that the external weight calibration should be carried out by a
qualified technician from your supplier to ensure the accuracy of the scale.
Dolphin 9903 V 1.1
.
.
key.
.
is not accessible for approval models.
The display shows the calibration
weight (equals to the full capacity) and
the weight unit. The last digit flashes.
kg
4 The calibration weight can be
modified if necessary.
The scale is calculating the internal
kg
value of the zero point.
The display shows the calibration
weight.
kg
ON/ZERO
UNITS Downward digit selecting (9-0)
TARE Move the cursor rightward
NET/GROSS
18
Upward digit selecting (0-9)
Move the cursor leftward
SME300000041