Hold Function Setting - Excell Weighing Scale User Manual

EXCELL PRECISION CO., LTD

1-6 Hold Function Setting

Press the TARE key
Use the ON/ZERO or UNITS
key to input a parameter
Press the TARE key
Input "00"
Press the TARE key to
complete the function setting
Dolphin 9903 V 1.1
No Hold function
"Peak" hold function mode
When the weight keeps changing, the scale will automatically hold
and display the largest value.
Press any key to clear the held value.
"Stable" hold function mode 1
When the scale becomes stable, the display shows and holds the
weight value, which can not be changed.
Press any key to clear the held value.
"Stable" hold function 2
When the scale becomes stable, the display shows and holds the
weight value, which can not be changed.
When the scale is re-zeroed (weight less than 10d), the held value is
automatically cleared.
.
The display shows the current hold
function mode
Hold function setting
Default setting = 0
0 No hold function
1 "peak" hold function mode
2 "stable" hold function mode 1
3 "stable" hold function mode 2
ON/ZERO
UNITS Downward digit selecting (9-0)
TARE Move the cursor rightward
NET/GROSS
17
Upward digit selecting (0-9)
Move the cursor leftward
SME300000041