Download Print this page

Instructions De S6Curit6 Importantes - Jenn-Air JGS9900BDB15 Use & Care Manual

Gas downdraft slide-in range
Hide thumbs Also See for JGS9900BDB15:

Advertisement

Available languages

Available languages

Oven Light
To assure the proper replacement bulb is used, order bulb
from Jenn-Air. Call 1-800-JENNAIR (1-800-536-6247_),ask for
part number 74004458 - halogen bulb.
To Replace Oven Light 6ulb:
1. Disconnect power to the oven.
2. When oven is cool, use fingertips to grasp edge of bulb
cover. Pull out and remove.
3. Carefully remove old bulb by pulling straight out of
ceramic base.
4. To avoid damaging or decreasing the life of the new bulb,
do not touch the bulb with bare hands or fingers. Hold
with a dry cloth or paper towel. Push new bulb prongs
straight into small holes of ceramic base.
5. Replace bulb cover by snapping into place.
6. Reconnect power to the oven. Reset clock.
Leveling Legs
Removal of Gas Appliance
Gas appliance connectors used to connect this appliance to
the gas supply are not designed for continuous movement.
Once installed, DO NOT repeatedly move this gas appliance
for cleaning or to relocate. If this appliance has to be moved
and/or removed for servicing, follow the procedure described
in the installation instructions.For information, contact Jenn-
Air Customer Service at 1-800-JENNAIR (1-800-536-6247).
To prevent range from accidentally tipping, range must be
secured to the floor by sliding rear leveling leg into the anti-
tip bracket.
Electrical
Connection
Appliances which require electrical
power are equipped with a three=prong
grounding
plug which must be plugged
directly into a properly grounded three-
hole 120 volt electrical outlet.
Always disconnect power to appliance before servicing.
The three-prong grounding plug offers protection against
shock hazards. DO NOT CUT OR REMOVE THE THIRD
GROUNDING PRONG FROM THE POWER CORD PLUG.
If an ungrounded, two-hole or other type electrical outlet is
encountered, it is the personal responsibility
of the
appliance
owner to have the outlet replaced with a
properly grounded three=hole electrical
outlet.
Be sure the range is leveled when installed. If
the range is not level, turn the leveling legs,
located at each corner of the range, until range
is level.
ANTI-TIP
BRACKET
• LEVELING
LEG
9

Hide quick links:

Advertisement

Chapters

loading

This manual is also suitable for:

Jgs9900bds15Jgs9900bdf15Jgs9900bds16