Table of Contents
Advertisement
m
Go To
V/I
From the Disc
Navigation
screen,
you can jump
to the first scene
or last scene,
and playback
will
start
from that point.
TOP (END)
1 Press
the DIS(-" NAVIGATION
button.
2
Press
the MENU
button.
3 Use the I_l/l,'l_'l/'_'q/l,'l_J,'/ll
buttons
to
choose "Top" or "End" on the "Go To" menu
screen, and then press the I_/11 button.
4 Press !"/ll
to start playback.
Disc
or Card
Management
INITIALIZING
DISC OR CARD (FORMAT DISC. FORMAT CARD)
Initializing
a DVD-RAM/DVD-RW/+RW
disc
or card
will
allow
you
to delete
any
recoMed
contents.
Before
using
a DVD-RW/+RW
on this video
camera/recorder,
you must
format
it.
Before You Begin
• Be sure to use the AC adapter/charger
to power the DVD video camera/
recorder for initialization.
If the DVD video camera/recorder
is turned off
during initialization
and the initialization is interrupted,
incorrect
initialization will result and the incorrectly initialized disc will be
unusable.
• If you use a brand-new DVD-RW/+RW
disc, message "Disc is not
formatted" will appear: Initialize the disc, following the subsequent
messages (p. 37).
1
Press the DISC NAVIGATION
button.
2
Press the MENU button.
3
Use the i_/l"i't/_4_/i"l_/ll'>lll
buttons
to
choose "Fornrat
Disc" o1: "Format
Card"
on
the "Disc" or "Card"
menu screen, and then
press the !"/ll
button.
The screen for verifying
"Format
Disc" or
"Format
Card" will appear.
4
Choose "YES", and then press tire I_/11
button.
Note:
• If you wish to delete all recorded contents, it is
recommended
that you use initialization,
which will
delete all the scenes in much less time than using the
scene delete function.
• Initialization
will delete all the recorded contents on
disc or card: Be careful not to delete data by mistake.
• It may not be possible to initialize a disc with many
scratches
or dirt: Such a disc cannot be used (p. 9).
• This DVD video camera/recorder
may not recognize
some discs or cards that have been initialized on PC
or a device other than this DVD video camera/
recorder.
• If you attempt to initialize a disc or card in this DVD
video camera/recorder
when it is connected
to PC via
PC connection
cable, the disc or card may not be
initialized and may be unusable on this DVD video
camera/recorder.
If you choose the VR mode when initializing a
finalized DVD-RW (VR-mode), the finalization
will not
be released. (The DVD-RW will be a finalized disc
without any recorded
data, and recording will be
possible on it.)
Choosing the VF mode will release the finalization
of
the disc.
When using DVD-RW, a screen for prompting
you to choose the VF o1:VR nrode will appear.
•
Choose "NO" to cancel initialization.
97
Hide quick links:
Advertisement
Table of Contents
