Hitachi DZ-GX5080A Instruction Manual page 71

JUMPING TO SPECIFIED POINT (GO TO)
1 Press the MENU button
during playback.
2
Choose the option
(point you want to go
to), and then press tile I_/|| button.
Top:
To go to the start, and enter playback pause.
End:
To go to the end of last scene, and enter
playback pause.
Specify:
To go to a specified point and enter playback
pause. See the following for details.
OSpecifying the point to view
1
Cfioose "Specify" in step 2 abo, e, and then
press the I_'/11 button.
The screen for specifying the point to go to
will appear.
Position of currently Total recording time of
3
Press the 1_/|| button
to enter the selection.
The DVD video canrera/recorder will go to
the specified point and enter the playback
pause status.
Pressing I_'/11 again will start playback.
To cancel the "Go To" procedure midway, press
the • button before going to the specified point.
2
Use the I_l_/_l_l/_l/l_l_ buttons to select
the desired time of chosen point.
Press 141'4 : To select the start.
Press Dd_| : To select the end.
Press _1 or _ :
• Press once:
To move the cursor in ]O-second units
(]-still units for card)
• Hold down:
To move the cursor in ]-minute units
(]O-still units for card)
Note:
• If multiple scenes are selected using the Disc
Navigation function or SELECT button, choosing
"Top" will jump to the beginning of selected scenes
(p. 97).
• When multiple scenes are selected, the total time of
selected scenes will appear in the "total recording
time" display.
• With card the number of stills will appear at the
"TOP", "CURRENT", "END" and "GO TO" indicators.
• The cursor may net move at same-pitch intervals.
(When the start of scene is selected)
71