Table of Contents
Advertisement
8 Click "Write"
to create a DVD-Video.
Clicking
"Write" will display
the screen for
writing.
Check "Create
disc", perform
setting for
write, such as choosing
DVD write drive, and
then set a blank DVD-RW/DVD-R
into the
drive.
Clicking
"Preview"
will allow you to check
any image of DVD to be created.
Click
Click
Click the "Write" button:
The screen for
setting write will appear.
After checking
the
settings,
click "OK": Writing will start.
When write is complete,
the drive will open
to eject the DVD: Creation
of an original
DVD
is now finished.
Note,"
• If you load a written
DVD-RW in the write drive, the
dialog "Are you sure you want to delete the content of
disc?" will appear,
Deleting the content of disc will erase all data on the
disc: Carefully check the contents
of disc.
Choosing "Yes" will display the screen for choosing
the disc erasure method: After checking
it, click the
"OK" button. Once the contents on disc have been
deleted_ the cover of disc insertion
block on DVD
video camera/recorder
will open, Close the cover
following the message
instruction.
• If the disc contains a video file that does not conform
to DVD-Video format, the video will be re-encoded,
resulting in deterioration
of image quality.
• If you execute "File"-"Save
project", the halfway
operation status can be saved as a project file,
Reading in this saved project file will allow you to
restart the operation from the saved status.
• A project file will be saved in the project folder that
was designated
when images were saved, and the file
name will be automatically
attached,
121
Hide quick links:
Advertisement
Table of Contents
