Hitachi DZ-GX5080A Instruction Manual page 77

|
OEditing using submenu
Press the MENU button before pressing the I_/11 button in step 5 (see page 77): The submenu will
appear.
Edit ------T--- Delete ....................... To delete selected scenes
L--. Exit ............................ To restore the Disc Na_ igation screen
Select Start _ Current ....... To select scenes from the start to tile one that tile cursor is on
T at moment
the
I---- Current _ End ........ To select scenes front the scene the cursor is on to the end
All ............................. To select all scenes
Go To _ Top ............................ To move the cursor to the first scene
L..-.
End ............................ To move the cursor to the last scene
Pressing the • button will restore the screen in step 5.
Note:
Although the submenu screen will appear for each setting, some menu items may not appear, depending on the
setting.
DIVIDING MOVIES (EDIT - DIVIDE)
You can divide a scene into two parts.
To delete unnecessary portion of scene, first dix ide
portion.
1
Press the DISC NAVIGATION button.
2
Select the scene to be divided.
3
Press the MENU button.
4
Choose, "Scene", "Edit", "Divide" and then
press the IWII button.
5 The "Divide Scene" screen will appear: If you
are sure you want to divide the selected
scene, press the b'/ll button: The selected
scene will be played back.
If you want to change the scene to be divided,
you can change it on this screen.
O When you reach the
point where you want
to di_ ide the scene, _
press the SELECT
[d
i '[
button.
The status bar of
7 The screen for x erifying scone being played
di_ ision will appear: back can be switched
Choose "YES", and then off or on by pressing
press the IWII button, the DISPLAY button
the scene, and then delete the unnecessary
Choose "NO" to cancel division.
After division, the "Divide Scene" screen will
be restored.
Repeat steps 5 - 7 to divide another scene.
8 Press the • button to quit.
Note:
• If you press the MENU button before pressing the
I_/11 button in step 5, the submenu will appear,
• Search and frame advance are useful when
designating division points.
• Combining scenes that were divided will restore the
original scene (see page 79),
• If a special effect has been added to the original
scene, the "IN" effect will be added to the first half of
scene, and the "OUT" effect to the latter half,
• The division point may drift before or after the
designated point by approximately 0,5 seconds,
• Since a scene with a skip set cannot be played back,
no division point can be specified: Release the skip
for the scene before dividing it,
• If the division point is at a still, a message will appear,
but no division will be made.
• If the division point is at the start or end of a scene, a
message will appear, but no division will be made,
• A movie scene whose recording time is 0.5 seconds
or less cannot be divided.
• If free space available on disc is insufficient, division
will not be possible: Delete unnecessary scenes,
78