Table of Contents
Advertisement
|
Note:
• The 16:9 setting will be kept even after the DVD video camera/recorder
is turned off.
• When using a DVD-RW (VF-mode)/DVD-R/+RW:
You cannot specify the combination
of "VIDEO Mode: STD" and "16:9 On". If you specify "16:9 On" and try to
switch the VIDEO Mode to STD from XTRA or FINE, the screen will automatically
switch to the 4:3-aspect ratio
display.
• When using DVD-RW (VF-mode)/DVD-R,
switching between wide mode (16:9) and normal mode (4:3) will not be
possible while using the same disc.
• Images recorded with "16:9 On" (aspect ratio 16:9) specified
will be played back with the setting used during
recording regardless
of the 16:9 setting then being used.
• To view images recorded at 16:9 setting, switch the aspect ratio of your TV: See TV instruction
manual for this
switching.
• When using a video selector, the TV may not automatically
be switched to 16:9 mode.
• When the power switch is set to "1_1" or "[]", the aspect ratio of screen in recording pause will be 4:3 regardless
of
the setting on 16:9 wide mode.
• If you connect the DVD video camera/recorder
with a disc recorded in wide mode to a TV with 4:3 display only
and play it back, vertically
long images will appear. To display 4:3 images, set "TV type" (p. 103) to 4:3 and view
the images.
• If you play back a +RW recorded
in wide mode on a DVD recorder/player,
etc. vertically
long images will appear
even on a wide-screen
TV. In this case, change the setting on the DVD recorder/player,
or set "TV type" (p. 103) to
4:3 and view the images.
62
Hide quick links:
Advertisement
Table of Contents
