Recording Dark Subjects; Adjusting Color (White Balance) - Hitachi DZ-GX5080A Instruction Manual

RECORDING DARK SUBJECTS USING LCD MONITOR LIGHT
When Program AE is set to Low Light, you can use the light from LCD monitor to record a subject.
1
Press the MENU button, and choose
"Program AE" from the "Camera Functions
Setup"
nlenu.
2 Choose "Low Light", and designate it.
3 Press the MENU button to end the setting.
Note:
• Use the viewfinder to check the image to be recorded.
• The LCD monitor light allows you to record a subject
up to 3.2 feet (1 m) even in a dark place.
• An after-image will appear when filming a moving
subject or if camera shake occurs (it is recommended
that you use a tripod).
• If a subject cannot be focused properly, manually
adjust the focus (see page 52).
4
Open the LCD ___ monitor, turn it ]80 _ _
so that it faces the
same dh:ection as o__
the lens: The LCD
monitor will light
white.
ADJUSTING COLOR (WHITE BALANCE)
This DVD _ideo camera/recorder automatically adjusts the color of subject. Change the white
balance setting depending on the recording conditions.
Auto White balance always automatically adjusted None
Set You can manually adjust white balance to match the light B"/1
source or situation (p. 58)
Outdoor To record in fine weather "_'-
Indoor 1 To record under incandescent light, halogen light or bulb- -8,-
color type fluorescent light
Indoor 2 To record under fluorescent light :_
57