Hitachi DZ-GX5080A Instruction Manual page 82

COPYING STILLS ON DVD-RAM DISC TO CARD (COPY)
I Set tile power switch to "41" or "1"1".
2
Press the DISC NAVIGATION button.
3 Select tile still to be copied.
4 Press the MENU button.
5 Choose "Copy" on tile "Scene" menu screen,
and then press tile I_'/|| button.
6 The "Copy to card" screen will appear: If you
are sure you want to copy the selected still,
press the I_'/|| button.
Note:
• No movie can be copied.
• If you press the MENU button before pressing the
1_/11 button in step 6, the submenu screen will appear
(p, 78).
• See "Category" (p, 102) to check the stills recorded
on DVD-RAM disc.
• You can also select multiple scenes (p. 73).
• Even if all scenes, including movies, are selected to
be copied, only stills will be copied,
• Data on card cannot be copied to disc,
• The quality of still copied from disc to card will be the
same as when you recorded still on disc,
• Stills recorded on a device other than this DVD video
camera/recorder may not be copied normally.
If you want to change the still to be copied,
you carl change it on this screen.
7
The screen for x erifying copy will appear:
Choose "YES", and then press the I_'/||
button.
Choose "NO" to cancel cop}_
After Yes or No setting, the "Copy to card"
screen will be restored.
Repeat steps 6 and 7 to copy other stills to
car(].
8 Press the • button to quit.
83