Table of Contents
Advertisement
When the DVD video camera/recorder
is connected to PC
No drive icon appears
The DVD video camera/recorder
is not turned on.
29
on PC.
Check the power supply.
Turn PC off and then disconnect
the PC connection
cable. Turn
PC on again,
and then use the PC connection
cable to connect
the DVD video camera/recorder
to PC.
Make sure the PC connection
cable is completely
plugged
into
this DVD video camera/recorder.
Error occurs in playback
If error occurs
with USB connection,
the transfer
rate is not
of DVD video camera/
sufficient.
It is recommended
that you use a USB terminal
109
recorder
on PC.
conforming
to USB2.0
when connecting
the DVD video camera/
recorder.
Application
is not
Turn the PC and DVD video camera/recorder
off, and try again.
normally
run on PC.
Error occurs
during
The temperature
of DVD video camera/recorder
is too high due
writing
to disc.
to continuous
operation.
Disconnect
the DVD video camera/recorder
from PC once,
remove
the disc from the DVD video camera/recorder,
and then
turn it off. After a few moments,
connect
them again and write to
a brand-new
disc.
Transfer
of images
Connect
the DVD video camera/recorder
to another
USB terminal
stops,
of PC. If your PC is a desktop
type, it is recommended
that you
use USB terminal
on the back of PC. If you are using USB2.0
extended
card, it is also recommended
that you install the newest
version
driver provided
by each USB2.0
card maker.
Is disc scratched
or does dirt or fingerprint
adhere
to it?
Clean the disc.
10
This problem
may be solved if you update
the DVD editing/
creating
software
of your PC.
Make sure that your PC display
adapter
(video
card) conforms
to
109
DirectX9.0c.
Make sure the power switch
of this DVD video camera/recorder
is
set to "411" or "1_1".
29
While the DVD video camera/recorder
is connected
to PC, use
Explorer
to right-click
the DVD video camera/recorder
drive icon
and execute
"Eject".
115
DVD drive built into PC
cannot be used after the
provided
software
has
been installed.
Error appears
when
starting
ImageMixer
3.
Movies
are not
recognized
by
application
in PC.
The DISC EJECT
button
is not valid when
the DVD video camera/
recorder
is connected
to
PC.
No sound
is heard when
an MPEG file imported
into Macintosh
is played
back on Quick Time
with an MPEG
2
playback
component
adopted.
Since an MPEG file imported
into Macintosh
using
ImageMixer
3
uses the audio format of AC3 audio, no audio will be played
back
even if the Quick Time MPEG-2
playback
component
is
introduced:
Only video will be played
back. Use ImageMixer
3 for
playback.
122
I!
139
Hide quick links:
Advertisement
Table of Contents
