Table of Contents
Advertisement
JUMPING TO SPECIFIED POINT (GO TO)
1
Press the MENU button
during playback.
2
Choose the option
(point you want to go
to), and then press the
A button.
●Specifying the point to view
1
Choose "Specify" in step 2 above, and then
press the A button.
The screen for specifying the point to go to
will appear.
Position of currently
played back image
Go t o
TOP
0 : 00 : 00
Cursor
GO TO
TOP
END
Cursor position
2
Use the f/e/d/c buttons to select
the desired time of chosen point.
Press f
: To select the start.
Press e
: To select the end.
Press d or c
:
• Press once:
To move the cursor in 10-second units
(1-still units for card)
• Hold down:
To move the cursor in 1-minute units
(10-still units for card)
Go t o
TOP
0 : 00 : 00
GO TO
TOP
END
(When the start of scene is selected)
Cursor at current image position.
Cursor at (GO TO) position.
64
Go T o
To p
En d
S p e c i f y
ENTER
RETURN
Total recording time of
all selected scenes
CURRENT
END
0 : 03 : 26
0 : 24 : 24
0 : 03 : 26
ENTER
CANCEL
CURRENT
END
0 : 03 : 26
0 : 24 : 24
0 : 00 : 00
ENTER
CANCEL
Top:
To go to the start, and enter playback pause.
End:
To go to the end of last scene, and enter
playback pause.
RAM
Specify:
To go to a specified point and enter playback
pause. See the following for details.
3
Press the A button to enter the selection.
The DVD video camera/recorder will go to
the specified point and enter the playback
pause status.
Pressing A again will start playback.
To cancel the "Go To" procedure midway, press
the C button before going to the specified point.
:
Note
• If multiple scenes are selected using the Disc
Navigation function or SELECT button, choosing
"Top" will jump to the beginning of selected scenes
(p. 128).
• When multiple scenes are selected, the total time of
selected scenes will appear in the "total recording
time" display.
• With card, the number of stills will appear at the
"TOP", "CURRENT", "END" and "GO TO" indicators.
• The cursor may not move at same-pitch intervals.
123
Advertisement
Table of Contents
