Jumping To Specified Point (Go To) - Hitachi DZ-GX3300E(SW) Instruction Manual

JUMPING TO SPECIFIED POINT (GO TO)

1
Press the MENU button
during playback.
2
Choose the option
(point you want to go
to), and then press the
●Specifying the point to view
1
Choose "Specify" in step 2 above, and then
press the button.
The screen for specifying the point to go to
will appear.
Position of currently Total recording time of
played back image all selected scenes
Go t o
TOP CURRENT
0 : 00 : 00 0 : 03 : 26
Cursor
GO TO 0 : 03 : 26
TOP END ENTER
Cursor position
2
Use the / / /
the desired time of chosen point.
Press : To select the start.
Press : To select the end.
Press or :
• Press once:
To move the cursor in 10-second units
(1-still units for card)
• Hold down:
To move the cursor in 1-minute units
(10-still units for card)
Go t o
TOP CURRENT
0 : 00 : 00 0 : 03 : 26
0 : 00 : 00
GO TO
TOP END ENTER
(When the start of scene is selected)
72
Top:
Go T o
To go to the start, and enter playback pause.
T o p
En d
S p e c i f y
End:
To go to the end of last scene, and enter
ENTER RETURN
playback pause.
button. Specify:
To go to a specified point and enter playback
pause. See the following for details.
3
Press the
The DVD video camera/recorder will go to
the specified point and enter the playback
pause status.
Pressing
To cancel the "Go To" procedure midway, press
the
END
0 : 24 : 24
Note
• If multiple scenes are selected using the Disc
CANCEL
Navigation function or SELECT button, choosing
"Top" will jump to the beginning of selected scenes
(p. 98).
• When multiple scenes are selected, the total time of
selected scenes will appear in the "total recording
buttons to select
time" display.
• With card, the number of stills will appear at the
"TOP", "CURRENT", "END" and "GO TO" indicators.
• The cursor may not move at same-pitch intervals.
END
0 : 24 : 24
CANCEL
button to enter the selection.
again will start playback.
button before going to the specified point.
: