Table of Contents
Advertisement
9. Haveanother p erson holdtheConsole (17)nearthe
Upright ( 2).
Connect t heUpper W ireHarness (95)to thewirehar-
nessonthe Console (17).Connect thePulse
Extension W ire(101 ) tothe pulse wireontheConsole.
Next,locate thetwoground wiresthatareattached to
the Upright ( 2).Connect theground wirestothetwo
smallest w ireson theConsole.
Carefully insert a llexcess wiringupintotheConsole
(17)anddownintotheUpright ( 2).AttachtheConsole
tothe Upright w ithfourM4x 16mm Screws (98).
(Note: T heScrews maybefoundintheconsole box.)
Be careful to avoid pinching the wires.
10. Plug the Power Cord (93) into the Power Socket (92)
at the rear of the elliptical exerciser.
9
Do not pinch
the wires
during this step.
101
98
93
11. Make sure that all parts of the elliptical exerciser
are properly tightened. Cover the floor beneath the
elliptical exerciser to protect the floor from damage. Note: Some extra hardware may be left after assembly is
completed.
Advertisement
Table of Contents
