Cleaner Assembly - Hoover SteamVac FH50046 Owner's Manual

CARTONCONTENTS
Wi!
C
@
D
F
A. Carpet cleaner body
B. Upper handle
C. Handle bolts and nuts
D. Hose Holder
E. Hose
E Too] Holder with Screw
Remove al! parts from carton and identify each
item shown.
Make sure all parts are located before disposing of
packingmaterials,
NOTE: Phillips screwdriver needed for assembly.
Accessories not included with your model may be
purchased separately by visi_ng wv,,w.hoover.com,
ATTACH HANDLE
1.2 With cord hook to back of carpet cleaner, push
upper handle down onto lower handle. Push bolts
into holes on front of handle, but do not add nuts
yet. If bolts will not go through hole easi]y handle is
not pushed completely down.
ATTACHHOSEHOLDER
1_3 Slide hose holder onto screws in back of
machine. NOW puts nuts in place and use screw
driver to fasten.