Cleaner Assembly; Carton Contents; Attach Handle; Position Tools - Hoover U57809RM Windtunnel Cyclonic Owner's Manual

1. CLEANER ASSEMBLY

Carton contents

1-1
D

Attach handle

1-2
Using a Phillips screwdriver, remove (2) screws from the top of
the upper housing assembly.
Insert handle section (A) into upper housing assembly. Push down
firmly until you hear a click.
Fasten (2) screws on either side of handle base.

Position Tools

1-5
B
C
A
A
C
1-3
A
Place smaller diameter
end of wand (A) into
bottom of rack. Snap
wand into clip at top.
Repeat with other wand.
Crevice tool (B) fits into
one of the extension
wands.
Fit combination tool (C)
into storage area on side
of cleaner as shown.
A. Handle section
B. Cleaner base and upper housing assembly
C. Cleaning tools and wands
D. Powered Hand Tool
Remove all parts from carton and identify each item
B
shown.
Make sure all parts are located before disposing of
packing materials.
1-4
1-6
4
Fit powered hand tool (A)
A
into recessed area on front
of cleaner. Pivot toward
handle to snap in place.