Related Manuals for Hoover SteamVac FH50039
Summary of Contents for Hoover SteamVac FH50039
- Page 1 HOOVE ® ENGLISH ,.P pp. 1-17 ESPANOL ,._ p_g. 18-27 FRAN(_AIS ,._ p. 28-37 Deep Cleaner The Easy to Use Deep Cleaner SteamVac Dual V Deep Cleaner cleans carpet fibers by applying hot tap water and cleaning solution. www.hoover.com...
- Page 2 If it product. left outdoors, or dropped into water, should malfunction or breakdown, take it to a Hoover Factory Service Connect to a properly grounded Center or Authorized Hoover Warranty grounding provides a path of least resis- Service Dealer.
-
Page 3: Table Of Contents
Important safeguards ..If you need _ assistance: Parts needed for assembly ..Visit our website at www.hoover.com Click on the "Service" button to find Assembling deep cleaner ..the service outlet nearest you OR Deep cleaner description .. -
Page 4: Upper Handle
The assembled cleaner will look like this drawing. Model with SpinScrub hand tool is shown. NOTE: If the cord protector (A) on back Attach upper handle of handle should become dislodged Remove clean water tank (upper tank) during unpacking, make sure it is repo- from deep cleaner. -
Page 5: Hose
IEl;l Rotate top of caddy toward cleaner Storing hose Identify the hose parts before storing hose. handle. Slide caddy down so notch (G) tools on caddy rests in hook (H) on cleaner. I. Nozzle connector end Press hose, a few inches from nozzle J. - Page 6 r_d:] to reattach tool Pull tool down and outward. cover To reposition the tool, reverse this proce- dure. The tool cover is designed with a break- away feature which allows it to snap free if it is pushed open too far. To reattach, align hinges of cover with holes on sides of tool storage area.
-
Page 7: 19. Hose/Tool Caddy
The assembled deep cleaner will look like the drawing. Deep Cleaner Description Model with SpinScrub hand tool is shown. Hand grip 2. Solution trigger: press to release cleaning solution 3. ON/OFF switch 4. Wash/Rinse switch 5. SpinScrub hand tool (not included with all models) 6. - Page 8 Check clean water tank also; it may need to be refilled. Do not use without float and float retainer in place. If broken or dis- lodged, take to an Authorized Hoover Service Center or Dealer for repair. Wash/rinse switch to fill...
- Page 9 For Medical Information (U.S.) call 1-800-752-7869. Position bottom of tank onto cleaner and Fill container (16 oz.) with HOOVER Carpet/Upholstery Detergent or pivot tank to snap it into place. HOOVER Bare Floor Cleaner. Do not use Bare Floor Cleaner on carpet or upholstery.
- Page 10 Vacuum thoroughly - For carpet, wood bare floor surface or place waterproof pet. Pin up furniture skirts and use a HOOVER vacuum cleaner with an material (e.g. plastic) underneath them draperies. before cleaning. agitator for best results. Vacuum uphol- e.
- Page 11 8. Continue to squeeze trigger and Rinsing is not necessary, but will help slowly pull deep cleaner back toward remove detergent residue and help your 2. Fill detergent container with HOOVER you (second wet stroke). Release trigger carpet look fresher. Carpet/Upholstery...
- Page 12 1. Fill clean water tank according to instructions for Figs. 2-9 to 2-15. 2. With foam strip (C) (located under the 2. Fill detergent container with HOOVER Bare Floor Cleaner according to instruc- netting) in position as shown, place attachment on front of nozzle (D).
- Page 13 Select tool to attach tools Your model includes some combination G. SpinScrub hand tool has rotating of the following tools, but may not brushes for extra scrubbing action on include them all. small carpet areas, carpeted stairs and upholstery. For some models, the brushes can be removed for converting to the scrub module.
- Page 14 Wash it in water with mild detergent. Rinse and let air dry. Pad must be com- pletely dry before reattaching to module. Replacement pads may also be pur- chased. Ask for HOOVER part no. 40308001. Using scrub tool With a little solution, test the scrub tool on a hidden area before using on the desired surface.
- Page 15 Figs. 2-9 to 2-12. 9. Overlap strokes by 1/2 inch to help prevent streaking. If additional cleaning is necessary, wait 4. Fill detergent container with HOOVER Make additional strokes without pressing until the upholstery is completely Carpet/Upholstery Detergent according the trigger to remove more moisture.
- Page 16 Storage Before storing: • Empty clean water tank and let air If a minor problem occurs, it usually can dry. Replace on deep cleaner. be solved quite easily when the cause is • Unused detergent can be stored in found by using the check list below. the detergent container.
- Page 17 Canada service outlet locations (U.S. only). or from a U. S. Military Exchange. Do not send your cleaner to The Hoover Appliances purchased elsewhere are Company in North Canton for service, covered by a limited one year warranty this will only result in delay.