Hoover SteamVac FH50046 Owner's Manual page 6

ATTACH TOOL HOLDER
(Available on select models only)
1.4 Remove tool and taped screw from holder.
Insert projections on holder into slots on back of
cleaner. Insert screw and tighten with screw ddver.
STOREHOSE
1.5 Start with converter
end of hose (H). Fit
converter over tab near
tool holder (I). Press
converter firmly to snap
in place. Press solution
tube (G) into dip next
to converter as shown,
1.6 Wrap hose around
hook on upper handle
(K). Press hose into
clips on upper hose
holder (L).
,L
STORETOOL
(Available on select models only)
Cleaning Tool
1.7 To store cleaning tool, open too] door, place
nozzle in bracket and fit it securely into position. To
remove, reverse this procedure.
Break-Away Door
1.8 The tool cover is designed with a break-away
feature which allows it to snap free if it is pushed
open too far. To reattach, align hinges of cover with
slots on sides of tools storage area. Push cover
down to secure in place.