Cleaner Assembly - Hoover SteamVac F59149RM Owner's Manual

CARTON CONTENTS
1.1
A
A. Carpet cleaner body
B. Upper handle
C. Handle bolts and nuts
D. Hose Holder*
E. Hose*
F. Tool Holder with Screw*
*Available on select models only
ATTACH HANDLE
1.2 With cord hook to back of carpet cleaner,
push upper handle down onto lower handle. Push
bolts into holes on front of handle, but do not add
nuts yet. If bolts will not go through hole easily
handle is not pushed completely down.
ATTENTION
Prior to use, consult with Carpet Manufacturer
on cleaning recommendations for natural fiber
carpeting (including silk and wool), soft carpeting,
and loop Berber carpeting. Do not use on rugs or
carpet when dry cleaning is recommended.
ATTACH HOSE HOLDER
(Available on select models only)
1.3 Slide hose holder onto screws in back
of machine. Now puts nuts in place and use
screw driver to fasten.

1. CLEANER ASSEMBLY

B
C
Carpet
Upholstery
Cleaner
Remove all parts from carton and identify each item shown.
Make sure all parts are located before disposing of packing
materials.
NOTE: Phillips screwdriver needed for assembly.
Accessories not included with your model may be
purchased separately by visiting www.hoover.com.
1.2
1.3
5
D
Bare
Carpet
Upholstery Pre-
floor
Cleaner
Cleaner
cleaner
E
Actual model may vary from images shown.
F