Using The Tools - Hoover SteamVac FH50046 Owner's Manual

USINGTHE TOOLS(optio.a, tools s old _eparate_j)
A. Powered Hand Tool has rotating brushes for
extra scrubbing action on small carpet areas,
carpeted stairs and upholstery.
B. StaidUpholstery Nozzle has a built-th brush to
help provide the scrubbing action some spots may
need for removal,
C. Nozzle Cleaning Tool for removing tint and/or
debris from nozzle before storage
m A
HOW TO ATTACH HOSE
A CAUTION
To reduce the risk of injury from moving parts,
unplug cleaner.
4.2 To prevent possible leaking, remove Clean
Wate_ Solution Tank by pressing down on tank
handle (D) and pulling forward; set tank aside (do
not set tank on furniture),
Remove hose from storage rack.
Step on handle release pedal and lower carpet
cleaner handle unt[t it rests on the floor.
Unlatch back part of Dirty Water Tank and remove lid.
4.3 PultDitty WaterTankfrontpanel (E) up one inch
then rotateforwardso itis horizontalto floor.
4,4 Replace panel with converter (F), Slide
converter halfway down opening until it is firmly in
place.
4.5 Before connecting tube (G) to cleaner, make
sure black tabs are extended by pulling ¢ollar
toward tube.
Open door on hood labeled "Stairtupholstery
Cleaning Connection", Press round solution tube
connector onto round projection inside door,
Press connector collar down firmly to ensure that
it is fully connected.
4.6 The tank replaces in a hinge-like manner,
Position front of (_dunder tabs (H) oft front of ta_k,
Rotate lid down onto tank,
Make sum lid is secure on all sides before
c!eanJng.
For furl suction, it is important that the Dirty Water
Tank lid is propedy secured before cleaning,
Reverse procedure to remove hose and solution
tube.
Raise carpet cleaner handle to uprightposition.
13