Probe - GE Monogram ZET1R Owner's Manual

Care and Cleaning
IVall ()ve_
07)e1_
([007:_
The door is very heavy. Be careful when removing
and lifting the door.
1)o not lift the doov b)' the handk,.
To remove the door:
1 Fully open the door.
2 Pull the hinge lo(ks down toward the door
frmne, to Ih( unlocked position. A tool, su(h
_s a small flat-blade st rew(lrivel; may be
required.
g Firml} grasp both sides of th( door at the top.
4 Close door to the door remowd position,
whi(h is most of the w_l3 and lift it up and out
until th_ hinge arm is dear of the slot.
To replace lhe door:
1 Firml} grasp both sid(s of the door at the top.
'2 With the door at the same angle as the
r(moval position, seat the indentation ot the
hinge arln into the bottom edge of th_ hinge
slot. The notch in the hinge arm must bc
fllllv seated into the bottom of the slot.
3 Fully open the door. If tl_e door MI1 not fhlly
Ol)(n, the indentation is llOt seared correctly in
the bottom edge ot the slot.
4 Push the hinge locks up against the fl-ont
h-ame ot the oven caxity, to the locke(I
position.
5; Clos( the OVell door.
SI0t
Hinge lock
Pull hinge locks down to unlock
Removal position
BoSom 'e a_rm
edgeof
slot_
indentation
arm
Push hinge locks up to lock
]hobe
The temlx rature l)robe lnav be cl{ an{d with
soap an(I water or a soal>tilled scouring pad.
Cool Ill( temperature probe betbre cleaning.
Scour stubborn spots with a soal)-till{ d scouring
pad, rinse an(I (h>
Do not immo:se lhe to¢_[)el(Itmv p_)be i_ walel:
1)o not _lo_v lhe tem])oalmv ])_vbe i_* lhe overz.
44