Troubleshooting Tips - GE JKP18 Owner's Manual

Before YouCall ForService...
Troubleshooting tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Controlsignals after
entering cookingtime
or de!aystart
Possible Causes
You forgot to enter a bake
temperature or cleaning
time.
What To Do
• Press tile BAKE pad and desired temperature or the
SELF CLEAN pad and desired (lean time.
Fooddoes notbake Oven controls improperly set. • ,Nee tile Using the oven se( lion.
or mast properly Shelf position is incorrect • See tile Using the oven section.
or the shelf is not level.
Incorrect cookware or • See tile Using the oven section.
cookware of improper size
beingused.
Oven floor not in place. • Replace the oven floor.
Oven thermostat needs • See tile Adjust the oven thermostat--Do it yourself!
adjustment, section.
Fooddoes not Door not open to the • See tile Using the oven section.
bmilproperly broil stop position as
recommended.
Oven controls improperly set. • Make sure you press the BROIL HI/£O pad.
Improper shelf position • See tlae Broiling Guide
beingused.
Food being cooked • Use the broiling pan and grid that came with your oven.
in a hot pan. Make sure it is cool.
Cookware not suited • Use the broiling pan and grid that came with your oven.
for broiling.
The probe is plugged into the • Unplug and rem_ve the probe flom the oven.
outlet in the oven.
Aluminum foil used on the
• See tile Using the oven section.
broiling pan and ,grid has
not been fitted properly and
slit as recommended.
In some areas the power • Preheat tile broil element fin 10 minutes.
(voltage) may be low.
• Broil for tile longest period of time recommended in
the Broiling Guide.
Clock and timer A fuse in your home maybe • Replace the filse or reset tile cir( uit breaker.
do not work blown or the circuit breaker
tripped.
Oven controls improperly set. • See the Using the clock and timer section.
Oven light does Light bull) is loose or defective. • Tighten or replace the bulb.
not work
Pad operating light is broken. • Call for service.
3O