BeforeYouCall ForService...
Troubleshooting tips
Save time and money! Review the charts on the following
pages first and you may not need to ca# for service,
GEPppliance&com
Possible Causes
What To Do
Control signals
after
You forgot
to enter
a bake
= Press the Bake pad and desired
temperature
entering
cooking
time
temperature
or cleaning
or the Self Clean Std/tow
pad and
desired
clean
time.
or delay start
time.
Food does not bake
Oven controls
improperly
set.
* See the Using the oven secdon.
or roast properljt
Rack position
b incorrect
• See the Using the oven secdon.
or the rack is not level.
Oven floor not in place.
• Replace
tile oven floo_:
Oven thermostat
needs
* See the Adjust the oven thermostat--Do
it yourself!
adjustment,
sec d on.
Food does not
Oven door is open.
• Glose the doo_: This model
is designed
fur closed door
broilproperly
broiling
only. Always broil with the door closed.
Oven controls
improperly
set.
• Make sure you press the Broil Hi/Lo pad.
Improper
rack position
• See die Broiling Guide.
being used.
Food being cooked
• For best results, use a pan designed
for broiling.
in a hot pan.
Make sure it is coo/.
Cookware
not suited
* For best results, use a pan designed
fur broiling.
for broiling.
The probe
is plugged
into
• Unplug
and remove
the probe
flom the oven.
the outlet in the oven.
In some areas the power
• Preheat
the broil element
ff_r 10 minutes.
(voltage) may be low.
• Broil fbr the longest
period
of time recommended
in the Broiling Guide.
Clock and timer
A fuse in your home may be
• Replace
die fuse or reset the circuit
breaker:
do not work
blown or the circuit breaker
tripped.
Oven controls
improperly
set.
• See the Using the clock, timer and control lockout
see[ion.
Oven light does
Light bulb is loose or defective.
• Tighten
or replace
the bulb.
not work
Pad operating
light is broken.
• (;all for service.
25