After Installation - Salus RT300 Instruction Manual

Salus RT300 Manual 002:89

AFTER INSTALLATION

After completing installation and powering up the RT300 for the first time the
thermostat will behave in the following way:
All the indicators on the display and the backlight will be turned
on for two seconds. After two seconds, the RT300 will then
operate in Normal mode (Normal mode is when the thermostat
is displaying the room temperature).
The following table shows the settings of the RT300 digital thermostat
after Power on:
Function
Operation Mode
Room Temperature
Set Point Temperature
°C indicator
Frost Protection indicator
Heat indicator
Low-Battery Warning indicator
Output Relay
After Power on, the thermostat will operate in Normal mode (Normal mode is when
the thermostat is displaying the room temperature):
•
The set point temperature is reset to the default setting
•
The room temperature display is updated within 5 seconds
•
The control process starts
RT300 INSTRUCTION MANUAL
23/11/10 11:03
Status After Reset or Power On
Normal mode
22.0 °C, updated within 5 seconds
20.0 °C
On
Off
Off
Off, updated within 5 seconds
Off
Page 7
7