After Installation - Salus ST320RF Instruction Manual

ST320RF Manual Version 005:Layout 1 21/10/10 15:32 Page 14

AFTER INSTALLATION

After completing installation and powering up the ST320RF for the first time the programmable
thermostat will behave in the following way:
All the indicators on the display and the backlight will be turned on. After two seconds, the display will
change to show the currently installed firmware version.
The ST320RF will then operate in NORMAL mode and display the current room temperature.
All programmable thermostat settings will have been returned to default values.
If the Reset Button is pressed, the ST320RF will behave in the same way as described above, except that
any previously saved user settings stored in the internal memory will be deleted and overwritten with
the default settings.
14 ST320RF INSTRUCTION MANUAL