Salus RT300 Manual 002:89
REVIEWING SET POINT TEMPERATURE
SETTING SET POINT TEMPERATURE
The temperature will be changed in 0.5°C steps per key press. The RT300 will return
to Normal mode if no keys are pressed for more than four seconds.
Set point temperature cannot be changed if Frost Protection mode is enabled.
RT300 INSTRUCTION MANUAL
23/11/10
You can view the set point temperature at any time by
pressing either the UP or DOWN key.
To exit from the set point review, press the BACKLIGHT /
FROST key, or don't press any keys for approximately four
seconds – either of these actions will return the RT300 to
displaying current room temperature.
You can change the set point temperature very easily while
you are reviewing the set point temperature. Press the UP or
DOWN keys repeatedly to change the temperature setting.
The set point temperature will flash to indicate that it can be
changed:
11:03
Page 9
9