Sagem Phonefax 2612 User Manual page 36

TAD (Menu 4)

Individually, while listening to it, you can delete a message that has not been totally listened to.

Press the C key, then OK during the message you want to delete.

When too many faxes have been received and too many messages have been recorded, your machine is

saturated and cannot take in any other message: the message

faxes and/or delete the voice messages to get some spare memory.

(027( ,17(552*$7,21

You can interrogate your TAD remotely and thus listen to the messages you have received, only if the

telephone set you are calling from supports the tone dialling mode.

As delivered, this option is not available: to interrogate your TAD remotely, you should first enter

a remote interrogation code, which is shared with the fax answering machine (so that you can

also print out the faxes received). Please refer to § Remote interrogation code on page 18, for

more information.

On a remote telephone set, dial your own number.

Press the * key during the greeting message, then enter the 4 digits of your interrogation code: the

machine delivers all the voice messages you have received.

After the last message or if there is no message, the machine emits a series of beeps.

List of available remote operations:

MEMORY FULL

While listening:

• Pause or resume message listening by pressing

• Go to the next message by pressing

• Listen to the same message again by pressing

• Go back to the previous message again by pressing

After listening:

• Delete received messages by pressing

• Record your greeting message by pressing

stop the recording by pressing any key.

• Listen to your greeting message by pressing

• Switch on your TAD by pressing

• Switch off your TAD by pressing

• Resume message listening by pressing

is displayed. Print out the

. twice

then

and

Introduction

Telephoning