Advertisement
FAX
Select this mode if you expect substantial fax traffic.
Upon receiving an incoming call, the unit will ring and answer the call after a pre-set number of rings:
• if the call is a fax, the unit automatically switches to fax receive mode.
• if the call is a voice call, the latter will be lost unless you pick up the receiver before the programmed num-
ber of rings (i.e. before the unit automatically answers in fax receive mode).
Please refer to § Models with vocal tad (external) on page 31.
Upon receiving an incoming call, the unit will ring:
• if the call is a fax, the unit will automatically receive the fax.
• if the call is a voice call, the answering machine will automatically record the message left by the caller.
The unit will switch incoming calls automatically. Select this mode if you expect substantial fax traffic and do
not wish to be inconvenienced by incoming faxes.
Upon receiving an incoming call, the unit automatically and silently answers the call
prompting the caller to wait, then:
• if the call is a fax, the unit automatically switches to fax receive mode,
• if the call is a voice call, the unit will ring for 30 seconds
then automatically switch to fax receive mode.
The caller can therefore send you a fax.
The unit will function like a standard phone terminal. Select this mode if you expect little fax traffic.
Upon receiving an incoming call, the unit will ring but will not automatically answer the call. To take the call
manually, pick up the handset:
• if the call is a voice call, simply converse with the caller,
• if the call is a fax, press
Please refer to § Models with vocal tad (external) on page 31.
Upon receiving an incoming call, the unit will ring:
• if the call is a voice call, your answering machine will answer the call automatically and record any mes-
sage left by the caller,
• if the call is a fax, the unit will automatically switch to fax receive mode.
)25 7+( 02'(/6 :,7+287 +$1'6(7
Your unit receives faxes automatically with no action on your part (automatic FAX mode).
Upon receiving an incoming call, the unit will ring but you can not answer to an incoming call.
(*)
The unit will not play the ringing tone generated by the telephone network. However, if there are any other phone
terminals on the line, these will ring as normal.
(**)
If there are any other phone terminals on the line, these will not ring.
6
TEL-FAX
TEL
then hang up and your unit will automatically switch to fax receive mode.
(*)
(**)
. If you fail to pick up the receiver, the unit will
Introduction
, plays a serie of beeps
Advertisement
