Canopy Installation; Hanging The Fan - Casablanca Cottage Wet Owner's Manual

Hide thumbs

Table of Contents

canoPy Hardware (not to scale)

Step 4. attach the canopy to the crossbar mounting bracket

with three of the 8-32 x 2

Pack B) and lock washers provided with your Casablanca

fan. tighten using the provided screwdriver until snug

against the ceiling.

notE: on sloped ceilings, align the canopy opening with

the top or peak of the room.

Step 5a. to hang the motor housing assembly in the canopy,

hold the motor housing assembly firmly and insert the ball

into the canopy opening. Check that no wires are pinched.

Rotate the motor housing assembly until the slot in the ball

fits into the pin opposite the canopy opening.

Step 5b. trim excess motor wires, leaving at least 6 inches

above the downrod. Strip

of each wire using a wire stripper (available at your local

hardware store).