Canopy Electrical Connections; Canopy Hatch Installation - Casablanca Cottage Wet Owner's Manual

canopY elecTRIcal connecTIonS

Step 6. attach the fan wires to the ceiling fixture outlet box
wiring by placing the bare ends of the wires side by side and
then securing with a wire nut. test that the connection is
secure by pulling on the wire nut. Connect in this order:
• GREEN leads from mounting plate and downrod
assembly of fan to GRound conductor of power source
(ceiling outlet box). Secure with wire nut.
• WHITE wire from fan to white NEUTRAL wire in
ceiling fixture outlet box. Secure with wire nut.
• BLACK power wire and BLUE wire from fan to black
PoWER wire in ceiling outlet box. Secure with wire
nut.
after making the wire connections, the wires should be
spread apart with the neutral (white) wire and ground
(green) wire on one side of the canopy and the power (black
and blue) wires on the other side.
notE: if the color of your ceiling wires differs from that
described, consult an electrician.
Step 7a. tuck the wires into the canopy and turn the wires
upward and push them carefully back through the ceiling
plate into the outlet box.
Step 7b. install the canopy hatch with the canopy screw and
lock washer (Screw Pack B) using the provided screwdriver.
to do this, tilt the motor housing assembly away from the
hatch opening. tighten the screws firmly.
Step 7c. Straighten the fan, then check to ensure there is
no movement between the canopy and the ceiling or the
Perma•Lock downrod and the ball assembly.
™

canopY haTch InSTallaTIon

C
ottage
2 black wires
(power) &
1 blue wire
2 white
wires
(neutral)
3 Green
wires
(Ground)
wire nut
W
™
et
7