Craftsman 486.248471 Operator's Manual page 11

STEP 14: iNSTALL DUMP HANDLETUBE
(SEE FIGURE 13)
, Install the dump handle tube to the dump pivot bracket
assembly using three 5/16" x 1o3/4" hex bolts (G) and
5/16" nylock nuts (R).
DUMP PmVOT
BRACKET
\ 5/16"
NYLOCK
NUT
(R)
/
5/16" x 1o3/4"
HEX BOLTS (G)
STEP 16: iNSTALL DUMP CABLE
(SEE FIGURE 15)
, Squeeze the dump trigger and slide the anchor end
of the dump cable wire (long) into the hole in the
trigger= Release the trigger and guide the cable wire
through the slot in the bottom of the trigger and trigger
housing= Insert the end of the plastic cable covering
into the trigger housing=
Attach the dump cable to the dump handle tube using
three cable ties (NN).
DUMP CABLE (LONG)
DUMP TRIGGER
FIGURE 15
FIGURE 13
STEP 15: iNSTALL DUMP HANDLE TUBE EXTENSION
(SEE FIGURE 14)
install the dump handle tube extension on the dump
handle tube using a 1/4" x 1-3/4" hex bolt (H) and 1/4"
ny!ock nut (S).
DUMP HANDLE
TUBE EXTENSUON
\
1/4" x 1o3/4" X
HEX BOLT (H)_
\
114" NYLOCK
NUT (S)
FIGURE 14
11