Advertisement
Phone Models/Software versions
31xx/81xx
Old phones netmonitor has some differences when compared with the newer models, but this manual can be used
as a guide, because the overall working method and the contents are very similar.
51xx/61xx/71xx/88xx/91xx/32xx
This document covers the majority of menus from these phones netmonitor. Some of them may have little
differences, like missing/additional menus, different info, etc.
The 51xx and 61xx pages are almost identical. The 32xx has some more pages, which are not very well
documented yet. The 71xx has a whole bunch of pages concerning W@P. The 91xx pages are almost identical to
the 6110 ones.
The goal right now is to make an accessible manual, that will get better over the time. Please contribute with all
the info that you find relevant.
Information Sources :
[ 1 ] Netmonitor description (RD843.txt) from Nokia Mobile Phones
[ 2 ] Marcin Wiaceks homepage (
Menu Modes
There are three Menu Display modes:
- execute mode
- data display mode
- help mode
Different modes are marked in this manual as follows:
**************
*
*
Execute
*
Mode
*
**************
The execute mode is entered from the menu by scrolling and selecting or shortcut. If the
test index entered pertains to a test that resets a timer (test 80) for example, then the
timer is reset as soon as the Ok button has been pressed in the menu, and the data display
mode takes over. In other words, the execute mode is of the one -shot type. To run another
test in the execute mode, the Field Test Display menu must be re -activated.
During the data display mode, the field test data (e.g. carrier, power level, cell) is
visible on the main display. During the help mode, one screen of instructions is shown for
each test to make it easier to identify the test in question. A long pre ss of asterisk (*)
is used to toggle between these two modes.
(on some 3110 versions, the help screens follow the data display modes on the list)
The arrow keys (^,v) offer an easy way to switch to another test without
However, the data display mode remains, i.e. nothing will be executed or set on although
such tests would be passed. This is to prevent the user from accidentally clearing any
valuable data. (see 3.7.2 for details and 2.5 for recommendations).
The help mode is also a non-execute mode. Display numbers have been selected in such way
that no 5-terminated test number is an execute display.
http://marcin-wiacek.topnet.pl
++++++++++++++
*
+
*
+Data display+
*
+
Mode
*
+
++++++++++++++
)
##############
+
#
#
Help
+
#
Mode
+
#
##############
2
#
#
#
#
using the menu.
Advertisement
