Nokia NetMonitor Manual page 11

Display 21 – Constant voltage charging display
**************
* aaaa bbbb *
* cccc dddd *
* eeee ffff *
*
**************
aaaa Difference between measured voltage and goal voltage, decimal point is not
shown.
bbbb Difference between measured voltage and result of previous measurement
(basically same as using change of error), decimal point is not shown.
ccc Battery up voltage, maximum ripple voltage.
ddd Battery down voltage, minimum ripple voltage.
eee Average voltage.
fff Sum of membership function sets beliefs, range 0.00 -9.99, decimal point is not
shown; e.g. 1.53 is shown as 153. If sum of 1.00 is reached then battery full
indication is given.
Display 22 – Battery full detection
**************
* Eaaa Cbbb *
* Dccc Rddd *
* Ieee Afff *
* Tggg hhhh *
**************
Letters E, C, D, R, I, A, T and V are displayed if values are shorter than 4 digits.
Eaaa DerivCount membership function set, range 0.00 -1.00, decimal point is not
shown; e.g. 0.23 is shown as 023.
Cbbb ChargeAmount membership function set, range 0.00 -1.00, decimal point is not
shown; e.g. 0.23 is shown as 023.
Dccc VolDiffToMax membership function set, range 0.00 -1.00, decimal point is not
shown; e.g. 0.23 is shown as 023.
Rddd VolDropCnt membership function set, range 0.00-1.00, decimal point is not
shown; e.g. 0.23 is shown as 023.
Ieee VolDiffTime membership function set, range 0.00 -1.00, decimal point is not
shown; e.g. 0.23 is shown as 023.
Afff AverDiff membership function set, range 0.00 -1.00, decimal point is not shown;
e.g. 0.23 is shown as 023.
Tggg Temperature membership function set, range 0.00 -1.00, decimal point is not
shown; e.g. 0.23 is shown as 023.
Vhhh Voltage membership function set, range 0.00 -1.00, decimal point is not shown;
e.g. 0.23 is shown as 023.
##############
#MTDif MPDif #
#BupV BDownV#
#AverV SumMF #
* #
##############
##############
#DeriC ChAm
# VDif VDrop #
# VDTi AvDif #
# Temp Volt
##############
#
#
#
11