Advertisement
Display 60 – Reset counters to zero
**************
* FIELD TEST *
*
DISPLAY
*
COUNTERS
*
RESET
**************
With this display all counters of the field test display can be reset (i.e. all counters in
40 and 60 series).
Display 61 – Search and reselection counter display
++++++++++++++
+NOPSW
:aaaa+
+SYNCR
:bbbb+
+RESELEC:cccc+
+
++++++++++++++
aaaa
counter for MDI_NO_PSW_FOUND message received from DSP in hexad ecimal form.
bbbb
counter for synchronization measurement attempts in decimal form. If counter
value is over 9999 then four x are shown.
cccc
counter for cell reselections in hexadecimal form.
On poweroff the values of the counter displays are stored ont o the EEPROM, where they will
be read during power on. To initialize the counters to zero, select display 60. These
counters are automatically reset to zero when they exceed their maximum value.
Display 61 (dualband) – Search and reselection counter display
++++++++++++++
+aaaaa
bbbbb+
+ccccc
ddddd+
+eeeee
fffff+
+ggggg
hhhhh+
++++++++++++++
aaaaa
GSM900 counter for MDI_NO_PSW_FOUND message received from DSP in decimal form
(max 99999).
bbbbb
GSM1800 counter for MDI_NO_PSW_FOUND message received from DSP in decimal form
(max 99999).
ccccc
GSM900 counter for synchronization measurement attempts in decimal form. If
counter value is over 99999 then five x are shown.
ddddd
GSM1800 counter for synchronization measurement attempts in decimal form. If
counter value is over 99999 then five x are shown.
eeeee
counter for GSM900
fffff
counter for GSM1800 -> GSM1800 cell reselections in decimal form (max 99999).
ggggg
counter for GSM900
hhhhh
counter for GSM1800 -> GSM900
On power off the values of the counter displays are stored onto the EEPROM, where they will
be read during power on. To initialize the counters to zero, select display 60. Counters are
automatically reset to zero when they exceed their maximum value.
##############
#Use menu to #
*
#reset field #
*
#test display#
*
# counters
############# #
##############
#PSWMesgCntr #
#SyncMeasCntr#
#CellReselCtr#
+
#
##############
##############
#NOPswGSM DCS#
#Sync GSM DCS#
#reselG>G D>D#
#reselG>D D>G#
##############
-> GSM900
-> GSM1800 cell reselections in decimal form (max 99999).
#
#
cell reselections in decimal form (max 99999).
cell reselections in decimal form (max 99999).
19
Advertisement
