Advertisement
Display 42 (only in dualband phones) – Handover display, INTRA CELL
++++++++++++++
+ aaaa
bbbb +
+ cccc
dddd +
+eeefffggghhh+
+iiijjjkkklll+
++++++++++++++
aaa
counter of successful INTRACELL handovers (max 9999) from GSM900
bbb
counter of successful INTRACELL handovers (max 9999) from GSM1800 to GSM1800
ccc
counter of successful INTRACELL handovers (max 9999) from GSM900
ddd
counter of successful INTRACELL handovers (max 9999) from GS M1800 to GSM900
eee
counter of failed INTRACELL handovers (max 999) from GSM900
fff
counter of failed INTRACELL handovers (max 999) from GSM1800 to GSM1800
ggg
counter of failed INTRACELL handovers (max 999) from GSM900
hhh
counter of failed INTRACELL handovers (max 999) from GSM1800 to GSM900
iii
counter of successful back to previous normal INTRA CELL channel attempts
(max 999) from GSM900
jjj
counter of successful back to previous normal INTRA CELL channel attempts
(max 999) from GSM1800 to GSM1800
kkk
counter of successful back to previous normal INTRA CELL channel attempts
(max 999) from GSM900
lll
counter of successful back to previous normal INTRA CELL channel attempts
(max 999) from GSM1800 to GSM900
Counters will stop when they reach their maximum. To initialize the counters to zero, select
display 40. Also display 60 initializes these counters.
Display 43 L2 display
++++++++++++++
+T200MS :aaaa+
+T200BS :bbbb+
+T200MS :cccc+
+T200BS :dddd+
++++++++++++++
aaaa
GSM900 : counts how many times T200 in MS has expire d and therefore a L2
transmission has been repeated.
bbbb
GSM900 : counts how many times T200 in BS (network) has expired and therefore a
L2 frame was requested again.
cccc
GSM1800: counts how many times T200 in MS has expired and therefore a L2
transmission has been repeated. (for dualband phones)
dddd
GSM1800: counts how many times T200 in BS (network) has expired and therefore a
L2 frame was requested again. (for dualband phones)
The GSM900 counters are also valid in GSM900/GSM1800 multiband phones. Cou nters will stop
when they reach their maximum. To initialize the counters to zero, select display 40.
Display 60 also initializes these counters.
Display 44 – Toggle revision level
**************
*
* REVISION
*LEVEL IS 00 *
*
**************
When selected, changes the value of Revision Level from 0 to 1 and
vice versa. I have no idea if this makes sense in any circumstances.
##############
#G>G IntraD>D#
#G>D
OK
#IntraHoFail #
# BackToPrev #
##############
to GSM900
to GSM1800
##############
#T200 MS GSM #
#T200 BS GSM #
#T200 MS DCS #
#T200 BS DCS #
##############
*
*
*
D>G#
**************
*
*
* REVISION
*
*LEVEL IS 01 *
*
*
******* *******
16
to GSM900
to GSM1800
to GSM900
to GSM1800
Advertisement
