Add Rcu Dialog Box - HP XP P9500 User Manual

Item
Last Update Time
FREEZE Option
Round Trip Time
Check box, "Refresh the
RCU Operation window
after this dialog box is
closed":

Add RCU dialog box

This dialog box lets you link two storage systems for creating Continuous Access Synchronous Z
pairs. See "Configure disk arrays and define logical paths" (page 46)
Item
RCU S/N
LDKC
Controller ID
Logical Adr. (RCU CU)
SSID
MCU-RCU Path
Description
Date and time when the RCU was last updated.
Support for the CGROUP (FREEZE/ RUN) PPRC TSO command.
The time limit for data to travel from M-VOL to R-VOL.
To refresh the RCU Operation window after closing the RCU Status dialog box, click the
check box. By default, the check box is not selected.
Description
Remote system's CU serial number.
Remote system's LDKC number.
Remote system's controller ID.
Remote system's CU number.
Remote system's SSID.
Path from the ports on the local and remote systems.
for complete information.
Add RCU dialog box 143